3-Gallon Epoxy - No Tools
3-Gallon Epoxy - No Tools
* 3-Gallon High Performance 100% Solids Resin-Based Epoxy Coating
* Coverage is 380-480 square feet depending on the porosity of the concrete substrate
* Can be applied to concrete, wood and metal surfaces
* Available in 20 Colors
* Decorative Fleck not included
* High Gloss Finish
* Tool Kit not included
* 2 coats recommended for Beige, White & Yellow colors
The EpoxyMaster Epoxy Floor Coating Kit is an easy 6 step process.
Step 1. Surface Prep
Sweep and shopvac the floor to remove all dirt, dust, and debris, ensuring a clean surface.
Step 2. Oil Stains
Be sure to remove oil stains and contaminants using a degreaser.
NOTE: Please review the included instructional guide and DVD prior to installation.
Step 3. Profile Surface
Use EpoxyMaster® 1 part Prep Solution to 4 parts water to clean and etch the floor surface before coating. Rinse thoroughly and allow the floor to dry completely.
Step 4. Mixing
Pre-mix Part A and then pour Part B into the 5-gallon bucket (Ratio: 2 parts A to 1 part B). Begin mixing for exactly 2 minutes using a drill motor and the included mixing wand. Pour the mixed epoxy completely out of the mixing pail within 60 seconds onto the floor.
Step 5. Application
Trim all the edges using the 3-inch trim brush. Squeegee and back roll 3 to 5 foot sections until the surface area is complete.
Step 6. Decorative Fleck
Place approximately a quarter size amount of EpoxyMaster® decorative fleck into the palm of your hand and throw underhand with an upward motion into the air. Add the optional non-slip aluminum oxide to the floor if desired.
It's as easy as 1... 2... 3...
Welcome to our Frequently Asked Questions Page. Here you will find answers to the most frequently asked questions to assist you with the preparation and application of our flooring products. You may select from the following categories below. If there are questions that are not discussed in the categories click here to contact us directly and we will be happy to assist you.
EpoxyMaster Epoxy Floor Coatings Informational Literature Downloads
Below are downloadable copies of the EpoxyMaster Epoxy Floor Coatings informational literature, including brochures, tech sheets and instruction manuals. All of the files are in Adobe Acrobat PDF Format.
All of our products are made to order 3-5 days from receipt of order.
For all orders that fall under FedEx Freight shipping, please contact us directly for additional discounted shipping pricing.
The EpoxyMaster Instructional DVD
Please view our very detailed Instructional DVD below for the entire application process.
The filming of instructional methods on how to properly apply EpoxyMaster epoxy floor coatings.
El rodaje de los métodos de instrucción sobre cómo aplicar correctamente recubrimientos para pisos epoxi EpoxyMaster.
Vidéo éducative d’instructions: Comment appliquer soi-même la couverture de plancher en époxy.